Rm-materials-handling WIRE ROPE HOISTS Service Uživatelský manuál Strana 44

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 130
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 43
R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319
44/130
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
5.15.2 Assembly
c_holi4a
1. Hoist limit switch
2. Connection-box cover
3. Fixing screws limit switch
Disassembly:
Switch OFF the power supply to the hoist.
Remove the connection-box cover (2).
Remove the wires from the limit switch.
Remove the fixing screws (3).
Extract the limit switch (1).
Re-assembly:
Fit the limit switch carefully in its place, so that the pinion fits into the gear-rim of the drum.
Tighten the fixing screws (3)
Re-connect the wires.
Switch ON the power supply to the hoist and check the proper functioning of the limit switch.
! In many cases it is necessary to re-adjust the limit switch. Be aware of incorrect settings
during testing the operation.
Zobrazit stránku 43
1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 129 130

Komentáře k této Příručce

Žádné komentáře